I’m looking for some recommendations to improve my homelab. But first a bit of history to explain where I’m at and where I’m going. I currently have a super old Odroid C2 and a Raspberry Pi 4B. Everything is working great, but I’m missing two things in this setup: -The ability to transcode -A NAS Now a little bit about me, I’ve been using Linux for more than a decade, so I know how to do stuff, but when it comes to hardware, I have close to zero knowledge… So I was a bit surprised when I plugged 2 external HDDs on my rpi and it shutdown them after a few minutes. I found out that it was a power supply issue, so I did the first thing that came to my mind at this time: I bought another HDD with external power supply, to then find out that having a self powered and an external powered HDD would still fail (although it took longer).

So now I know my mistakes, I should have gone with a NAS instead. I checked the Synology NAS and found out NAS are actually quite expensive. I’m looking for at least 4 bays. I’ve been looking at some DIY NAS, but I’m a bit lost. I found some builds using a Jonsbo N2 that seems cool but at the same time I’m reading the fans are always running at full speed and I’m afraid that the power consumption will skyrocket.

So to sum up, I would like to have a NAS, ideally that can transcode and is low power. In the beginning, I wanted to have a NAS and a mini-PC that can transcode to replace my Odroid C2. But it seems the NAS are far more expensive than the mini PC. What are the recommendations here?

-Synology (Can it transcode?)

-A DIY (Jonsbo with an ITX board that can transcode)

-A DIY (Jonsbo with an ITX board just powerful enough for a NAS) + a mini PC

-Something else?

My budget was 500€, but it seems I won’t be able to do much below 700€

  • Monkey With A ShellEnglish
    3•5 months ago

    https://xigmanas.com/xnaswp/

    I’ve used this on a variety of boxes since it was called freenas back before a fork long ago. A NAS doesn’t need a whole lot of power in itself if the job is just to store and offer disk space. My current setup is in a full 2U rack server with 14 drives (12 spinning, 2 ssd) and it averages 169 watts. If you do the transcoding on whatever box is actually accessing the data it can save on the need for extra compute on the NAS.

    • @KwaOPEnglish
      1•5 months ago

      Can you share what hardware you are using to run this?

      • Monkey With A ShellEnglish
        2•5 months ago

        Currently a R730XD, but it has been run on plenty of other things down to a 1.3Ghz/4GB IPX box at the beginning. It’s pretty stripped down to run as an embedded system rather than a full server OS.